FAMILY TK
Carbide Tipped Thin Kerf Saw Blades
Use for
Thin-kerf rip-cut saw blades for soft and hard solid wood, unprocessed chip board and plywood on circular, rip and table saw machines. The controlled source specifies ATB tooth geometry with a positive cutting angle and a steel plate intended to reduce vibration.
Precision dimensionsExact SKU selectionQuote on request
10 available variants
Diameter (D)ThicknessBoreTeeth
Choose your dimensions.
Diameter × Thickness × Bore × Teeth
10 variants shownView quote list (0) →
| Rakecraft SKU | Code no. | Diameter (D) | Thickness | Bore | Teeth | Quantity | Select |
|---|---|---|---|---|---|---|---|
| RC-P30-TK-5244 | 5244 | 182 mm | 1 mm | 1 in | 60 | ||
| RC-P30-TK-5245 | 5245 | 205 mm | 1.2 mm | 1 in | 40 | ||
| RC-P30-TK-5246 | 5246 | 205 mm | 1.5 mm | 1 in | 40 | ||
| RC-P30-TK-5247 | 5247 | 205 mm | 1.7 mm | 1 in | 40 | ||
| RC-P30-TK-5248 | 5248 | 255 mm | 1.5 mm | 1 in | 40 | ||
| RC-P30-TK-5249 | 5249 | 255 mm | 1.7 mm | 1 in | 48 | ||
| RC-P30-TK-5250 | 5250 | 255 mm | 2 mm | 1 in | 48 | ||
| RC-P30-TK-5251 | 5251 | 305 mm | 2 mm | 1 in | 48 | ||
| RC-P30-TK-5252 | 5252 | 305 mm | 2.2 mm | 1 in | 48 | ||
| RC-P30-TK-5253 | 5253 | 305 mm | 2.5 mm | 1 in | 48 |
Technical and selection notes
Diameter and thickness remain in millimetres while the bore remains in inches, matching the controlled source exactly.
Reference catalog: pages 44. View catalog ↗
