FAMILY ALU
Aluminum Cutter
Use for
Circular-saw tooling for cutting and dividing aluminum and U-PVC profiles on table saws and single/double miter saws with mechanical workpiece clamping. The controlled source specifies flat-triple-chip tooth geometry with a negative cutting angle.
Precision dimensionsExact SKU selectionQuote on request
13 available variants
Diameter (D)ThicknessBoreTeeth
Choose your dimensions.
Diameter × Thickness × Bore × Teeth
13 variants shownView quote list (0) →
| Rakecraft SKU | Code no. | Diameter (D) | Thickness | Bore | Teeth | Quantity | Select |
|---|---|---|---|---|---|---|---|
| RC-P30-ALU-4240 | 4240 | 4 in | 2 mm | 20 mm | 40 | ||
| RC-P30-ALU-5240 | 5240 | 5 in | 2 mm | 20 mm | 40 | ||
| RC-P30-ALU-6260 | 6260 | 6 in | 2 mm | 1 in | 60 | ||
| RC-P30-ALU-72260 | 72260 | 7 in | 2.2 mm | 1 in | 60 | ||
| RC-P30-ALU-82240 | 82240 | 8 in | 2.2 mm | 1 in | 40 | ||
| RC-P30-ALU-82560 | 82560 | 8 in | 2.5 mm | 1 in | 60 | ||
| RC-P30-ALU-10380 | 10380 | 10 in | 3 mm | 1 in | 80 | ||
| RC-P30-ALU-103100 | 103100 | 10 in | 3 mm | 1 in | 100 | ||
| RC-P30-ALU-103120 | 103120 | 10 in | 3 mm | 1 in | 120 | ||
| RC-P30-ALU-123100 | 123100 | 12 in | 3 mm | 1 in | 100 | ||
| RC-P30-ALU-123120 | 123120 | 12 in | 3 mm | 1 in | 120 | ||
| RC-P30-ALU-143100 | 143100 | 14 in | 3 mm | 1 in | 100 | ||
| RC-P30-ALU-143120 | 143120 | 14 in | 3 mm | 1 in | 120 |
Technical and selection notes
Mixed inch/mm units are retained exactly from the controlled technical master; no bore or diameter conversion is applied.
Reference catalog: pages 43, 44. View catalog ↗
